Remote Control Encoder PT2262 - Elechouse

<strong>Remote</strong> <strong>Control</strong> <strong>Encoder</strong><br />

<strong>PT2262</strong><br />

<strong>PT2262</strong> is a remote control encoder paired with PT2272 utilizing CMOS Technology. It<br />

encodes data and address pins into a serial coded waveform suitable for RF or IR<br />

modulation. <strong>PT2262</strong> has a maximum of 12 bits of tri-state address pins providing up to<br />

531,441 (or 3 12 ) address codes; thereby, drastically reducing any code collision and<br />

unauthorized code scanning possibilities.<br />

! CMOS Technology<br />

! Low Power Consumption<br />

! Very High Noise Immunity<br />

! Up to 12 Tri-State Code Address Pins<br />

! Up to 6 Data Pins<br />

! Wide Range of Operating Voltage: Vcc = 4 ~ 15 Volts<br />

! Single Resistor Oscillator<br />

! Latch or Momentary Output Type<br />

! Available in DIP and SO Package<br />

! Car Security System<br />

! Garage Door <strong>Control</strong>ler<br />

! <strong>Remote</strong> <strong>Control</strong> Fan<br />

! Home Security/Automation System<br />

! <strong>Remote</strong> <strong>Control</strong> Toys<br />

! <strong>Remote</strong> <strong>Control</strong> for Industrial Use

---

<strong>Remote</strong> <strong>Control</strong> <strong>Encoder</strong><br />

<strong>PT2262</strong>

---

<strong>Remote</strong> <strong>Control</strong> <strong>Encoder</strong><br />

<strong>PT2262</strong><br />

UHF Band 4 Data Transmitter Circuit is recommended.

---

<strong>Remote</strong> <strong>Control</strong> <strong>Encoder</strong><br />

<strong>PT2262</strong><br />

UHF Band Address-only (Zero Data) Transmitter Circuit is recommended.

---

<strong>Remote</strong> <strong>Control</strong> <strong>Encoder</strong><br />

<strong>PT2262</strong><br />

UHF Band Address-only (Zero Data) Zero-Stand-by Transmitter Circuit is<br />

recommended.

---

<strong>Remote</strong> <strong>Control</strong> <strong>Encoder</strong><br />

<strong>PT2262</strong><br />

Infrared Ray 6-Data Circuit. Adjust Rosc to get 38 KHz Carrier Pulse at DOUT Pin is<br />

recommended.

---

<strong>Remote</strong> <strong>Control</strong> <strong>Encoder</strong><br />

<strong>PT2262</strong><br />

Valid Product No.<br />

<strong>PT2262</strong><br />

<strong>PT2262</strong>-S18<br />

<strong>PT2262</strong>-IR<br />

<strong>PT2262</strong>-S<br />

<strong>PT2262</strong>-IR-S<br />

Package<br />

18 Pins, DIP<br />

18 Pins, SO<br />

18 Pins, DIP<br />

20 Pins, SO<br />

20 Pins, SO<br />

PT 2262 - XX - X<br />

Package Code :<br />

P : Plastic DIP (this code can be omitted)<br />

S : Small Outline, 20 Pins<br />

S18 : Small Outline, 18 Pins<br />

Output Type :<br />

RF : RF Application (can be omitted)<br />

IR : IR Application<br />

Product Number<br />

PTC Prefix